18650 lithium battery cells

　　IP5318 Yingjixin fast charging mobile power solution introduction

　　Introduction to IP5318 Yingjixin fast charging mobile power supply solution - This article mainly introduces the IP5318 Yingjixin fast charging mobile power supply solution. Yingjixin IP5318 is an integrated Type-C protocol, QC2.0 output fast charging protocol (compatible with DCP Identification function, compatible with BC1.2, Apple and Samsung mobile phones), synchronous boost converter, lithium battery charging management, battery power indicator and other multi-functional power management SOC, providing a complete power solution for mobile power.

　　Not long after Qualcomm launched QC3.0 fast charging technology, Yingjixin Technology, a leader in highly integrated mobile power solutions, released the world's first all-in-one fast charging mobile power single-chip solution IP5318. This chip uses a number of industry-first technologies. When used with adaptive voltage protocols such as Qualcomm QuickCharge3.0 or type-c, it can allow smart mobile device manufacturers to shorten the charging time of many products. After developers adopt adaptive charging technology, they can significantly shorten charging time and improve charging efficiency. It is also compatible with previous 5V output universal chargers that use the USBBC1.2 specification, which can minimize the cost of thermal management and battery charging systems. cost incurred.

　　Pin diagram

　　Charging IP5318 has a constant current and constant voltage lithium battery charging management system with a synchronous switching structure that supports high-voltage charging. It is specially optimized for 5V, 9V and 12V charging voltages and can automatically match different charging voltage specifications.

　　When the battery voltage is less than 3V, 400mA trickle charging is used; when the battery voltage is greater than 3V, it enters constant current charging, with a maximum constant current charging current of 4.8A; when the battery voltage is close to the set battery voltage, it enters constant voltage charging. After charging is completed, if the battery voltage is 0.1V lower than the set battery voltage, restart battery charging.

　　IP5318 adopts switching charging technology, with a switching frequency of 500kHz, a maximum charging current of 4.8A, and a charging efficiency of up to 97%, which can shorten the charging time by 3/4.

　　Ip5318charger will automatically adjust the charging current to adapt to adapters with different load capacities, ensuring that the adapter is not pulled or hung.

　　IP5318 does not support simultaneous charging and discharging. During the charging process, the output discharge port will be closed to prevent the input high voltage from damaging the charged device.

　　Boost

　　IP5318 integrates a synchronous switching converter system that supports high-voltage output, supporting the output of different voltages such as 5V, 9V, and 12V, with load capacities of 5V3.1A, 9V2.0A, and 12V1.5A respectively.

　　The switching frequency is 375KHz. The built-in soft-start function prevents faults caused by excessive inrush current during startup. Integrated output over-current, short-circuit, over-voltage, over-temperature and other protection functions ensure stable and reliable operation of the system.

　　The output current of the boost system can be automatically adjusted with the temperature to ensure that the IC temperature is below the set temperature.

　　typical application

　　Figure 1 TYpE-A+Micro-B+type-c simplified application schematic (4LED indicates power)

　　Technology Zone 220V AC to 12V DC reference design The current status of domestic lithium battery ternary material patent technology layout What is the echelon utilization of automotive power batteries? It will become a hot issue for a long time. New energy vehicle design cannot be ignored Cells and battery materials 2020 China’s automotive power battery pack shipments and forecasts in 2020

Read recommendations:

Coin Battery LR 43

Characteristics of lithium-ion batteries.401030 battery

Generally, batteries undergo the following activation process

14500 battery Processing

6LR61 alkaline battery