3V Button battery

　　Breakthrough in 3V Button battery will make better use of sulfur and increase utilization rate

　　Breakthroughs in 3V Button battery will make better use of sulfur and increase utilization rates - According to foreign media reports, in order to adapt to the future needs of electrification, new battery technologies need to be developed. One of the options is 3V Button battery. Compared with lithium-ion batteries, theoretically It is said that the energy density of this kind of battery is five times higher. Recently, researchers at Sweden's Chalmers University of Technology achieved a breakthrough in the development of such batteries using catholyte with the help of graphene sponge.

　　According to foreign media reports, in order to adapt to the future needs of electrification, new battery technologies need to be developed. One of the options is 3V Button battery. Compared with lithium-ion batteries, theoretically, the energy density of such batteries is five times higher. Recently, researchers at Chalmers University of Technology in Sweden achieved a breakthrough in the development of such batteries using catholyte with the help of graphene sponges.

　　The researchers' idea is very novel, using a porous, sponge-like aerogel made of reduced graphene oxide as an independent electrode of the battery to better utilize sulfur and increase utilization rate.

　　A traditional battery consists of four parts. First, there are two supporting electrodes covered with active materials, the anode and the cathode. Between them is an electrolyte, usually a liquid, that allows ions to be transferred back and forth. The fourth part is the separator, which acts as a physical The barrier prevents contact between the two electrodes while allowing ion transfer.

　　Previously, researchers have tried to combine the cathode and electrolyte into a "cathode electrolyte." The concept helps reduce battery weight while enabling faster charging and greater power delivery capabilities. Now, thanks to the development of graphene aerogels, the concept is proven to be effective and promising.

　　First, the researchers injected a thin layer of porous graphene aerogel into a standard battery box. Carmen Cavallo, from Chalmers University of Technology's Department of Physics and lead researcher on the study, said: "The aerogel is a long, thin cylinder, which is sliced like a salami and then the slices are squeezed into the battery. Then Then you take a sulfur-rich solution, the catholyte, and add it to the cell. The porous aerogel acts as a support and absorbs the solution like a sponge."

　　"The porous structure of graphene is the key. It can absorb a large amount of catholyte and obtain enough sulfur, so that the catholyte concept can be realized. This type of semi-liquid catholyte is very necessary and can not be lost during the sulfur cycle. Any sulfur, since the sulfur is already dissolved in the catholyte, is not lost by dissolution”.

　　In order for the catholyte to perform its role as an electrolyte, part of the catholyte is also added to the separator, which also maximizes the sulfur content of the battery.

　　At present, most commercial batteries are lithium-ion batteries, but the development of such batteries is approaching its limit. In order to meet higher requirements, it becomes more important to find new chemical methods. 3V Button battery have several advantages, such as higher energy density. Currently, the best lithium-ion battery on the market has an operating efficiency of 300 Wh/kg, and theoretically, it can reach a maximum of 350/kg. Theoretically, the energy density of 3V Button battery is about 1000 to 1500 Wh/kg.

　　Aleksandar Matic, professor in the Department of Physics at Chalmers University of Technology and leader of the research, said: "In addition, sulfur is cheap, abundant and more environmentally friendly. In addition, lithium-ion batteries generally contain fluorine, which is harmful to the environment, while 3V Button battery No."

　　The problem with 3V Button battery so far has been that they are not stable enough, resulting in short cycle life. But when researchers at Chalmers University of Technology tested a new battery prototype, they found that the new battery still maintained 85% of its capacity after 350 cycles.

　　The new design avoids two major problems in the degradation process of sulfur lithium batteries. One is the loss of sulfur by dissolving into the electrolyte, and the other is the "shuttle effect" in which sulfur molecules migrate from the cathode to the anode. In this design, the impact of such problems is greatly reduced.

　　However, researchers point out that there is still a long way to go before the technology can reach its full market potential. Aleksandar Matic said: "Because the production method of this kind of battery is different from that of most normal batteries, new production processes need to be developed to commercialize this battery."

Read recommendations:

12V 27A

Performance of ternary lithium battery

Energy of Disposable Lithium Batteries

portable energy storage battery power supply company

li ion 18650 battery pack direct sales