602030 lipo battery

　　Daily maintenance of harvester battery

　　1. Check the battery

　　During use, dust and soil around the battery, metal oxides on the electrode posts and wire joints, and lithium manganese oxide batteries on the battery cover should be regularly removed. The wiring should be firm and reliable.

　　Regularly check whether the battery assembly in the car is secure, ensuring that the wire joints are tightened and in good contact.

　　2. Prohibit long-term high current charging and discharging

　　When starting the diesel engine, the starting time should not exceed 5 seconds each time, and there should be a 15 second interval between adjacent starts. At the same time, the horn should not sound for a long time.

　　3. Cannot charge with high current

　　The voltage regulation value of the generator regulator should be strictly adjusted according to the regulations.

　　Practical experience has proven that increasing the charging voltage by 10% will reduce the battery's lifespan by 2/3

　　4. Adequate electricity

　　The battery should be charged regularly to ensure it operates under charging conditions, and the energy battery should be charged within 24 hours.

　　5. Winter application

　　When using batteries in winter, it is important to maintain sufficient power to prevent lithium manganese oxide batteries from freezing due to a decrease in density, which could cause the casing to rupture.

　　6. Storage method

　　If the battery is not needed for three months, it should be sufficient and then circulated in cool air. At the same time, regularly maintain the density of lithium manganese oxide batteries to keep them in a sufficient state of electrical energy. If not needed for a long time, first charge and discharge the battery for 20 hours, pour out the lithium manganese oxide battery, clean it multiple times with distilled water until there is no acidity or alkalinity in the water, air dry it, tighten the lid, and seal it for storage

Read recommendations:

Hanging neck fan

Lithium battery technology with nano element injection

Design specification for lithium batteries

26650 battery Processing

LR41 battery