Fully sealed lithium manganese battery.18650 battery lithium ion 2200mah

　　The lithium Manganese dioxide battery uses Manganese dioxide treated by special process as the positive active material, and the metal lithium with high potential and high specific energy as the negative active material. The electrolyte adopts organic electrolyte solution with good conductivity. The battery structure has two forms: fully sealed and semi sealed. Of course, the safety and shelf life of a fully sealed product are better than those of a semi sealed product.

　　The negative electrode of lithium Manganese dioxide battery is metallic lithium, and the active material of positive electrode is Manganese dioxide. The electrolyte is the inorganic salt Lithium perchlorate (LiClO4), which is dissolved in the mixed organic solvent of propylene carbonate (PC) and 1,2-dinenenebb methoxy ethane (DME). Its chemical expression is:

　　(-) Li/LiClO4-PC+DME/MnO2 (+) Battery negative reaction: Li → Li++e positive reaction: MnO2+Li++e → MnO2 (Li+) Total reaction: Li+MnO2 → MnO2 (Li+)

　　The reaction mechanism of lithium Manganese dioxide battery is different from that of ordinary batteries. In non-aqueous organic solvent, lithium ions dissolved in anode lithium migrate into the lattice of MnO2 through electrolyte, and generate MnO2 (Li+). Mn is reduced from+4 valence to+3 valence, and its crystal structure remains unchanged.

　　Lithium, with Atomic number 3, is located in the first place of the first main group of the periodic table. Among the known metals, Atomic mass is the lightest (6.94), and the electrode potential is the most negative (-3.045V). The element name comes from Greek, which originally means "stone". In 1817, it was discovered by Swedish scientist Afwezon while analyzing the tremolite feldspar mine. Due to its most negative potential, batteries formed by matching with appropriate positive electrode materials have superior electrical performance. Lithium Manganese dioxide battery is the cheapest and safest type of lithium series primary battery. The open circuit voltage is around 3.3V, the load voltage is 2.8V, the nominal voltage is 3.0V, and the cut-off voltage is 2.0V. The discharge voltage is relatively stable and suitable for high-power discharge.

Read recommendations:

Adhesive hook and loop straps

Introduction: Explanation of the reasons for bulges in robot lithium battery customization.L1022 bat

What are the requirements for customizing the general configuration of 18650 lithium batteries?18650

3.2v 100ah lifepo4 battery cell

AA NiMH battery