How to Understand the Safety Issues of Lithium Batteries

　　1、 It adopts a switching element, and when the temperature inside the battery rises, its resistance value also increases. When the temperature is too high, it will automatically stop power supply;

　　2、 Choosing an appropriate partition material will automatically dissolve the micron sized micropores on the partition when the temperature rises to a certain value, preventing lithium ions from passing through and stopping internal reactions in the battery;

　　3、 It is to set a safety valve (which is the vent hole on the top of the battery). When the internal pressure of the battery rises to a certain value, the safety valve automatically opens to ensure the safety of the battery's use.

　　Sometimes, although the battery itself has safety control measures, due to certain reasons, the control fails, and there is a lack of safety valve or gas cannot be released through the safety valve in time, causing the internal pressure of the battery to rise sharply and cause an explosion.

　　In general, the total energy stored in lithium-ion batteries is inversely proportional to their safety. As the battery capacity increases, the battery volume also increases, leading to poor heat dissipation performance and a significant increase in the likelihood of accidents. For lithium-ion batteries used in mobile phones, the basic requirement is that the probability of safety accidents should be less than one in a million, which is also the minimum standard acceptable to the public. For large capacity lithium-ion batteries, especially those used in automobiles, it is particularly important to use forced cooling.

　　Choosing a safer electrode material and lithium manganese oxide material ensures a fully charged state in terms of molecular structure. The lithium ions in the positive electrode are fully embedded in the negative electrode carbon pores, fundamentally avoiding the generation of dendrites. At the same time, the stable structure of lithium manganese oxide makes its oxidation performance much lower than that of lithium cobalt oxide, and the decomposition temperature exceeds 100 ℃ of lithium cobalt oxide. Even if internal short circuits (punctures), external short circuits, and overcharging occur due to external forces, the danger of combustion and explosion caused by the precipitation of lithium metal can be completely avoided.

Read recommendations:

6F22

Development of Lithium Ion Battery

As of my knowledge cutoff in September 2021, the lithium-ion battery industry was experiencing a sig

Ni-MH battery pack manufacturer

Nickel Hydride No. 5 battery