Parameters of Cylindrical Lithium - ion Batteries

　　Understanding the parameters of cylindrical lithium - ion batteries is essential for evaluating their performance and choosing the right battery for specific applications.

　　One of the key parameters is the voltage. Cylindrical lithium - ion batteries typically have a nominal voltage, which represents the average voltage output during normal discharge. For example, a common 18650 cylindrical lithium - ion battery has a nominal voltage of around 3.6 - 3.7 volts. This voltage value determines the compatibility of the battery with the device it powers. A device designed to operate at a certain voltage range must be paired with a battery that can supply the appropriate voltage to ensure proper functioning.

　　The capacity of a cylindrical lithium - ion battery, usually measured in milliampere - hours (mAh) or ampere - hours (Ah), indicates the amount of electrical charge it can store. A higher capacity means the battery can deliver more energy over a period. For example, a 2000 mAh battery can theoretically supply 2000 milliamperes of current for one hour. This parameter is crucial for applications where long - lasting power is required, such as in remote - controlled drones that need to stay airborne for an extended time.

　　The discharge rate is another significant parameter. It refers to the rate at which the battery can release its stored energy. Batteries with a high discharge rate are capable of delivering a large amount of current in a short time. This is important for applications like power tools, where a sudden burst of high - power is needed to drive the tool's motor. A high - discharge - rate cylindrical lithium - ion battery can provide the necessary power to quickly drill through materials or cut through tough surfaces.

　　Internal resistance is also an important factor. A lower internal resistance means less energy is wasted as heat during the charging and discharging process. Batteries with low internal resistance can charge faster and deliver more power efficiently. In applications where rapid charging is desired, such as in some electric vehicles, a battery with low internal resistance is highly preferred.

Read recommendations:

6LR61

Analysis of common problems of lithium iron phosphate material in battery processing

Internal Resistance of Square - shaped Lithium - ion Batteries

401030 battery manufacture

NiMH battery pack