What are the seven major factors of lithium battery cycle performance?CR1225 battery

　　Lithium battery wholesale: The characteristics of the circulatory system do not need to say more about the key level of lithium battery. As far as the macroeconomic is concerned, the longer life life of the circulatory system represents less and less resource consumption. Each staff related to the lithium battery production industry has nothing to think about large -capacity lithium batteries.

　　1. Water

　　Excessive water will cause adverse reactions with positive and negative specific chemicals, damage its structure and then damage the circulating system. Excessive other water will not help the occurrence of SEI membranes, but the moisture of the amount of marks cannot be removed. , The water of the marking element can also ensure the characteristics of the lithium cell horizontally.

　　2. Positive and negative tamping

　　The positive and negative consolidation is too high. Although it can improve the energy of the lithium battery, it will only reduce the circulating system characteristics of raw materials horizontally, analyze from basic theory, and the larger the structure, the larger the structure of the raw material. Structure is the foundation of ensuring that lithium batteries can circulate systems.

　　3. The objective cause of the detection

　　The battery charging multiple during the test, as of the working voltage, the battery charging as of the current, the overcharging loss in the detection, the temperature of the test room, the final decision in the process of detection Waiting for external elements, they are more or less damaged the results of the recycling system functional test.

　　4. Too much negative level

　　In addition to the reasons for too many negative levels, in addition to considering the damage of the initial irreversible volume and the density error error of the plastic film, the damage to the characteristics of the circulatory system is a consideration. For the lithium cobaltate and the high pure graphite management system, negative, negative The "thin disadvantage" of the "thin disadvantage" of the "thin disadvantage" of the level of high pure graphite into the whole process of the circulatory system is all over.

　　5. Relative density of glue film (sharing of energy storage lithium -ion battery manufacturers)

　　Considering that the relative density of the membrane to the circulatory system is basically a mission that is impossible to end. The relative density of the membrane is not consistent.Different from the volume of the raw accumulation, if it is not a lithium battery rickler or overlap layer superimposed layer, it is for lithium battery cells with the same volume and raw materials.

　　6. Raw material type

　　The choice of raw materials is to damage the characteristics of the lithium battery characteristics. The raw materials with weak circulatory system characteristics have been selected. The processing process is useful, and it will be improved. Afterwards, there is a trace of difficulty, and the characteristics of the circulating system will not be simply scary. From the perspective of the raw material perspective, the circular system characteristics of a fully charging battery.

　　7. Lithium battery electrolyte amount

　　There are three reasons for the key to the amount of lithium battery electrolyte. There are three reasons for the key to the formation of the circulatory system. One is that the irrigation rate is insufficient. The other is that although the irrigation rate is rich in brittleness, only the lack of immersion in the impregnation caused by high -level universities is tamped. The third is that the electrolytes inside the lithium battery in the cycle system are consumed.

Read recommendations:

6LR61

Series parallel connection calculation of lithium battery pack

National standard requirements for batteries

household energy storage lithium battery Processing

CR1620 battery