rechargeable battery 18650 3.7v

　　18650 lithium battery PACK process quality characteristics

　　1. The use of high-quality lithium batteries requires qualified and stable suppliers to provide single batteries with good performance. The single batteries have passed a series of safety tests and performance tests and are used after passing the test.

　　2. The internal resistance of the battery is required to be low and the consistency is good. Regardless of the 14.8V lithium battery pack or other energy storage battery packs, low internal resistance must be ensured to ensure the capacity, platform, and heat dissipation of large current discharge.

　　3. The structure of the 18650 lithium battery PACK adopts a ventilation design, and the distance between two adjacent batteries is not less than 2mm. This structure requires a plastic bracket to fix the battery.

　　4. The PACK battery factory uses slotted nickel sheets for spot welding. The size of the nickel sheets meets the requirements of high-current discharge. The material of the nickel sheets ensures low internal resistance. The spot welding machine ensures stable work, the quality of the welding needles is guaranteed, and the operators are trained and qualified. After the on-the-job operation, check whether the solder joints are firm after spot welding. In addition, each batch of products is subjected to a vibration test to verify the anti-vibration performance.

　　5. Different batches of batteries are made into typical finished products and life tests are carried out. When the lithium battery PACK design specification experience is summarized, the battery products are cycle tested to obtain the actual cycle life.

　　6. Verify the high and low temperature performance of the 18650 lithium battery pack. The cells of different PACK lithium battery manufacturers are made into finished products and are subjected to different rate discharge tests at high and low temperatures to obtain the actual discharge curve.