18650 li ion rechargeable battery Vendor

　　18650 lithium battery pack process quality characteristics

　　1. The use of high-quality lithium batteries requires qualified and stable suppliers to provide single batteries with good performance. The single batteries have passed a series of safety tests and performance tests and are used after passing the test.

　　2. The internal resistance of the battery is required to be low and the consistency is good. Regardless of the 14.8V lithium battery pack or other energy storage battery packs, low internal resistance must be ensured to ensure the capacity, platform, and heat dissipation of large current discharge.

　　Low temperature high energy density 18650 3350mAh-40℃ 0.5C discharge capacity ≥60%

　　Charging temperature: 0~45℃ Discharging temperature: -40~+55℃ Specific energy: 240Wh/kg -40℃ discharge capacity retention rate: 0.5C discharge capacity≥60%

　　Click for details

　　3. The battery structure adopts ventilation design, and the distance between two adjacent batteries is not less than 2mm. This structure requires plastic brackets to fix the batteries.

　　4. The PACK battery factory uses slotted nickel sheets for spot welding. The size of the nickel sheets meets the requirements of high-current discharge. The material of the nickel sheets ensures low internal resistance. The spot welding machine ensures stable work, the quality of the welding needles is guaranteed, and the operators are trained and qualified. After the on-the-job operation, check whether the solder joints are firm after spot welding. In addition, each batch of products is subjected to a vibration test to verify the anti-vibration performance.

　　5. Different batches of batteries are made into typical finished products and life tests are carried out. When the lithium battery PACK design specification experience is summarized, the battery products are cycle tested to obtain the actual cycle life. , What should be paid attention to when welding 18650 lithium battery pack process?

　　1. Pay attention to the spot welding current when welding 18650 lithium batteries.

　　2. Pay attention to the diameter of the welding pin when welding the 18650 lithium battery.

　　3. When welding the 18650 lithium battery, pay attention to the distance between the welding pins.

　　4. Pay attention to the number of solder joints when welding the 18650 lithium battery pack process.

　　5. When spot welding, do not explode, do not short circuit, and do not weld falsely.

　　2. What should be paid attention to when soldering 18650 lithium battery pack process?

　　1. Pay attention to the diameter of the tin wire when soldering the 18650 lithium battery.

　　2. When soldering 18650 lithium batteries, attention should be paid to the constant and stable soldering temperature.

　　3. When soldering, it should be noted that the soldering time should not exceed how many seconds.

　　4. The soldering iron tips used for soldering different 18650 lithium battery surface materials are also different.