502030 battery

Talking about the relationship between the 502030 battery charger and battery life of electric forklifts

Electric forklift batteries store city electricity or industrial electricity to drive vehicles for the purpose of loading. Its power source switching source is the charger. A good charger can increase battery life and extend the use time. Master the charging time. Usually the battery is charged at night, and the charging time is about 8 hours on average. If it is shallow discharge (short use time after charging), the battery will be used up quickly. Do not overcharge, which will cause the battery to lose water, heat up, and reduce the battery life. Therefore, the battery discharge depth is 70% for the best charging time. The cost needs to be based on the actual situation to avoid damaging the charging power. So in the actual operation process, how to make the charger charge the electric forklift battery in a standardized manner? The editor briefly talks about a few points: Combine the charging power supply and the power supply of the board. Connect the plug of the battery to the forklift battery connector, and the charger according to the actual battery voltage. Set the power switch to the on position and start charging. Disconnect the power supply, unplug the power plug and end charging. Long-term idleness in a low-power state will cause more serious damage to the battery. When the battery is not in use, charge it once a month to extend the battery life.

When the forklift battery is used for a long time, various factors will shorten the battery life. The charger or the use needs to be checked. What is the reason why the electric forklift battery cannot be fully charged? After working for a period of time, the full electric forklift battery charger will automatically stop, without current and voltage. It is a circuit problem, which may be a weak solder joint, such as poor contact or failure. It is normal under normal temperature conditions, and it begins to appear when the temperature rises. This phenomenon sometimes appears gradually and sometimes suddenly. If the battery cannot be charged or is not fully charged, it may damage the battery. Don't be careless. It should be checked and repaired in time to restore it to normal.

Read recommendations:

401030 90mAh 3.7V

How to repair nickel -metal hydride batteries.lithium ion battery energy storage Manufacturing

Safety Standards and Specifications for Lithium Batteries

701224 battery manufacture

18650 lithium ion battery 3.7v