18650 battery 4800mah.Production process of lithium titanate batteries

　　Cycle life, safety, energy density, and fast charging and discharging capacity have always been the most important indicators for measuring power batteries. Lithium titanate materials, due to their zero strain, high lithium potential, and nano particle properties, have inherent advantages such as high safety, ultra long lifespan, and fast charging. They have always been considered an ideal negative electrode material to replace graphite. However, due to the high potential of lithium titanate towards lithium, it also results in low battery energy density and relatively short range. However, the proposal of a power battery technology solution with fewer batteries and fast charging has made lithium titanate batteries have a broader application prospect. Therefore, the current key is to solve the problems encountered in the industrialization process of lithium titanate batteries.

　　Lithium titanate negative electrode material, due to its easy absorption of water and high activity, is prone to react with the electrolyte in the battery system and cause gas expansion. Therefore, during the formation stage of lithium titanate batteries, it is necessary to fully react with the side reactions, timely remove the gas, and form a passivation film on the negative electrode surface, which can suppress gas expansion during subsequent use. Therefore, the formation process is particularly important for lithium titanate batteries.

　　Patent 201110294924.3 discloses a method for the formation of a power lithium-ion battery. The method involves charging the battery in three stages, with each stage requiring a long period of standing. After the battery is pre charged, the battery is placed in a glove box, the gas is removed by vacuum, and the liquid injection port is sealed. This method can effectively form a stable SEI film by using closed mouth formation. Patent application 201310192025.1 discloses a formation method for improving the cycle life of lithium titanate batteries. The method adopts low current formation and high-temperature aging, and then depressurizes and exhausts gas after being left unused. Multiple low current formation and high-temperature aging are repeated to fully react with the water inside the battery, extract the generated gas, and solve the problem of lithium titanate battery bloating. The above methods can achieve improved lifespan through repeated degassing and multiple formation steps, but they all have problems with long formation time and complex processes.

Read recommendations:

Ni-MH AAA700mAh 1.2V

What is the current battery technology?48v 10kwh energy storage solar system

Research on sintering matching of crystalline silicon solar cells

801738 battery company

23A battery