18650 rechargeable battery lithium 3.7v 3500mah
CH
About Us
Company Profile Development History Sales Network Partner Social Responsibility
Products
Rechargeable Battery Battery Packs Energy Storage Battery Primary Battery Handicraft Article
Subsidiary Company
SINO TECHNOLOGY SUNBEAM GREEN POWER DATAPOWER SEONG-HEE STD
Honor
Qualification Certificate Patent Certificate Honor Certificate
R&D
R&D Center Test Center
News
Company News Industry News
Contact Us
18650 rechargeable battery lithium 3.7v 3500mah
18650 rechargeable battery lithium 3.7v 3500mah

Other information

Home  >  Other information

26650 battery

release time:2024-06-06 Hits:     Popular:AG11 battery

The latest research can reduce the risk of 26650 battery short circuit and increase energy density

 

Recently, a study by Columbia University showed that by implanting boron nitride (BN) nanocoating, the electrolyte in lithium-ion batteries can be stabilized, thereby reducing the risk of battery short circuit. Moreover, the study said that replacing the graphite anode in lithium-ion batteries with lithium metal can also increase the energy density of the battery.

 

Through research, it was found that the charging capacity of lithium metal is theoretically about 10 times higher than that of graphite, so if lithium metal is used to replace the graphite anode in lithium-ion batteries, the energy density of the battery can be increased. However, during the lithium plating process, lithium dendrites are prone to form. If the dendrites penetrate the separator in the middle of the battery, it will cause the battery to short-circuit. However, solid ceramic electrolytes are not flammable and can also inhibit the growth of lithium dendrites, so solid ceramic electrolytes have great potential for use.

 

The liquid electrolyte inside lithium-ion batteries is also highly flammable, posing a risk of short circuit and fire. However, a 5 to 10 nanometer boron nitride (BN) nanofilm can be used as a protective layer to isolate the electrical contact between metallic lithium and the electrolyte. Boron nitride (BN) nanofilm is chemically and mechanically stable to lithium and has a high level of electronic insulation, so it can greatly improve the safety of lithium-ion batteries.


Read recommendations:

18650 1200mAh 3.7V

Recycling process for lithium iron phosphate batteries after disassembly.CR927 battery

Lithium battery fast charge principle

lithium battery for solar energy storage system price

CR2320 battery

Last article:32700 battery

Next article:21700 battery

Popular recommendation

360° FACTORY VR TOUR
lithium ion battery 18650 priceWhatsapp
lithium ion battery 18650 price

lithium ion battery 18650 priceTel
+86 19925278095

lithium ion battery 18650 priceEmail
admin@sino-techgroup.com

TOP