CR1625 battery

What are the basic correct charging methods for CR1625 battery packs?

Regarding how to charge CR1625 battery packs, we know that CR1625 battery packs need to be charged with matching chargers. In the industrial supporting market, since each product is also packaged separately and is not compatible with each other, the corresponding charger should be selected according to the CR1625 battery pack used, and charged strictly according to the requirements. Whether it is industrial or civilian market, since the basic principle of how to charge lithium-ion batteries is the same, the steps and standards for charging lithium-ion batteries are standardized. Under normal circumstances, the nominal voltage of lithium-ion batteries is 3.7V and the charging voltage is 4.2V.

Prevent charging at too high a temperature

If a lithium iron phosphate battery pack is used in an environment above the specified temperature, that is, above 35C, the battery power will continue to decrease, that is, the battery power supply time will not be as long as usual. If the device is charged at such a temperature, the damage to the battery will be greater. Even if the battery is stored in a hotter environment, it will inevitably cause corresponding damage to the quality of the battery. Therefore, keeping the temperature at a suitable level is a good way to extend the life of lithium batteries.

Avoid charging at too low a temperature

If you use lithium batteries in a low temperature environment, that is, below 4C, you will also find that the use time of CR1625 battery packs is reduced. Some mobile phones' original lithium batteries cannot even be charged in low temperature environments. But don't worry too much, this is only a temporary situation. Unlike use in high temperature environments, once the temperature rises, the molecules in the battery are heated and the previous power is immediately restored.

Read recommendations:

Alkaline 9V Battery LR61

Why are imported cells more expensive than domestic cells?1.2V NiMH batteries

Research on solar cell laser cutting technology experiment

16340 battery manufacture

18650 battery 2500mah