CR2032 button cell batteries

　　In what environment should CR2032 button cell batteries be stored?

　　When using CR2032 button cell batteries for electric forklifts, the high temperature in the working environment should not exceed 60 degrees Celsius. When the low temperature is not less than -5 degrees Celsius, if these two extreme temperatures are exceeded, the battery needs to be specially customized.

　　CR2032 button cell batteries can be used in cold storage for no more than one hour (above -20 degrees Celsius), but they cannot be placed or charged in cold storage, and they cannot be over-discharged.

　　Stop using it when the battery level is less than the alarm level, which may cause battery failure and cannot be used. It must be sent to the manufacturer for repair. It cannot be over-discharged, otherwise it will cause damage to the battery.

　　When it is not needed for a long time, it cannot be fully charged and stored. It should be charged and stored. Full grid storage can cause damage to lithium-ion cells. Typically 50-70% power storage.

　　Electric forklifts generally use lithium iron phosphate batteries, which have a higher safety factor than ternary CR2032 button cell batteries.

　　CR2032 button cell batteries will only burn when there is a short circuit fault, obvious extrusion impact, or high temperature polarization state. Lithium iron phosphate batteries will burn slowly in the event of an accident, but are not prone to explosion.

　　storage in natural environment

　　1. CR2032 button cell batteries should be stored in a clean, dry and ventilated indoor environment at 20±5°C and with a relative humidity of no more than 75%.

　　2. Prevent contact with corroded objects, prevent heat below 2 meters, and prevent moisture.

　　3. The battery pack is positive and the negative should not fall into any conductive dirt such as metal materials.

　　4. The battery pack should prevent impact and pressure on mechanical equipment.

Read recommendations:

802540 800MAH 3.7V

What problems should be paid attention to when assembling lithium batteries

How to ensure the consistency of the 18650 battery pack?button cell battery cr1620

802540 polymer battery company

NiMH No.7 batteries