18650 rechargeable battery lithium 3.7v 3500mah
CH
About Us
Company Profile Development History Sales Network Partner Social Responsibility
Products
Rechargeable Battery Battery Packs Energy Storage Battery Primary Battery Handicraft Article
Subsidiary Company
SINO TECHNOLOGY SUNBEAM GREEN POWER DATAPOWER SEONG-HEE STD
Honor
Qualification Certificate Patent Certificate Honor Certificate
R&D
R&D Center Test Center
News
Company News Industry News
Contact Us
18650 rechargeable battery lithium 3.7v 3500mah
18650 rechargeable battery lithium 3.7v 3500mah

Other information

Home  >  Other information

Lithium battery charging method

release time:2023-06-01 Hits:     Popular:AG11 battery

  








  1. Pre charging stage: When using a charging device to charge the battery or battery pack, the charger starts charging at a current value of 0.02C. When the BMS detects that all battery voltages are above 2000mV, it can switch to constant current charging mode;

  2. Constant current charging stage: At the beginning of constant current charging, the charger outputs a constant current value at the maximum current specified by BMS;

  3. Constant voltage charging stage: At the end of constant current charging, if the voltage value of any single battery in the battery pack reaches the alarm value of the upper limit of the single battery voltage, the charger will switch to constant voltage output according to the instructions issued by BMS, and the current value will be adjusted according to the instructions of BMS until the voltage value of any single battery reaches the cut-off value of the upper limit of the single battery voltage;

  4. End of charging: If the voltage value of any single battery reaches the cut-off value of the upper limit of the single battery voltage, the charger will stop charging according to the instructions of BMS.

  5. During charging operation, professional personnel should take care of the charging plug and socket to ensure that they are working properly without any heating phenomenon, to ensure that the charging equipment is working properly, to ensure that the battery pack and its protective circuit are working properly, and that the entire power system is free from short circuits, overcurrent, overheating, and overcharging phenomena.


Read recommendations:

3.2V 310Ah

Blindly disassembling the battery causes the loss of ECU information.902030 polymer battery

Polymer lithium battery and lithium battery difference

801752 battery Processing

CR1620 battery

Last article:Prospects for the Development of Lithium Batteries

Next article:When should I start charging in normal use?

Popular recommendation

360° FACTORY VR TOUR
lithium ion battery 18650 priceWhatsapp
lithium ion battery 18650 price

lithium ion battery 18650 priceTel
+86 19925278095

lithium ion battery 18650 priceEmail
admin@sino-techgroup.com

TOP