Polymer lithium battery expansion

　　1. Reasons for expansion of polymer lithium battery

　　Poor packaging: air and water enter the inner part of the cell during the manufacturing process, causing the electrolyte to decompose and produce gas.

　　The water content of the cell exceeds the standard: during the process, once the water content exceeds the standard, the electrolyte will fail and produce gas.

　　Corrosion: the polymer soft coated lithium battery cell is corroded, and the aluminum layer is consumed by reaction, thus losing the barrier effect on water and causing gas expansion.

　　Surface damage: It is damaged by external force, and the water will enter the core due to puncture. When lithium metal is exposed to the air, it will react violently with oxygen.

　　Bump: The aluminum material is very easy to deform. A slight knock will cause damage. The larger the cell and the larger the air bag are, the easier it will be to damage.

　　Short circuit: the contact between positive and negative electrodes causes short circuit, and the polymer lithium battery cell is puffed or even smokes.

　　Internal short circuit: Shrinkage, curl, damage, burr penetrating the isolation film of polymer lithium battery will cause internal open circuit, resulting in bulge.

　　Overcharge and overdischarge: When the polymer soft battery is overcharged or overdischarged, and the protection plate is abnormal, the battery cell will be seriously inflated.

　　2. Repair and use of expanded battery

　　If the cell phone battery has been charged and bulged, use your fingers to find the gap between the batteries, and use the pointer to poke a small hole to let the air inside escape.

　　A new polymer lithium battery pack can be purchased to replace it. During the charging process, overcharge should be avoided, which can not only protect the battery from damage, but also save energy and protect the environment.

Read recommendations:

18650 2600mAh 3.7V

The correct way to charge lithium batteries.button cell battery cr2025

Lithium battery protection and management system

energy storage system lithium battery Processing

NiMH battery pack manufacturer