18650 rechargeable battery lithium 3.7v 3500mah
CH
About Us
Company Profile Development History Sales Network Partner Social Responsibility
Products
Rechargeable Battery Battery Packs Energy Storage Battery Primary Battery Handicraft Article
Subsidiary Company
SINO TECHNOLOGY SUNBEAM GREEN POWER DATAPOWER SEONG-HEE STD
Honor
Qualification Certificate Patent Certificate Honor Certificate
R&D
R&D Center Test Center
News
Company News Industry News
Contact Us
18650 rechargeable battery lithium 3.7v 3500mah
18650 rechargeable battery lithium 3.7v 3500mah

Other information

Home  >  Other information

Safety design of lithium battery

release time:2022-12-16 Hits:     Popular:AG11 battery


  Home energy storage battery FBC-HS01

  In order to avoid over discharge or over charge of the battery due to improper use, a triple protection mechanism is set in the single lithium ion battery. First, the switch element is used. When the temperature inside the battery rises, its resistance value rises accordingly. When the temperature is too high, the power supply will automatically stop; Second, select appropriate separator materials. When the temperature rises to a certain value, the micron sized micropores on the separator will automatically dissolve, so that lithium ions cannot pass through and the internal reaction of the battery stops; The third is to set a safety valve (i.e. the air vent at the top of the battery). When the internal pressure of the battery rises to a certain value, the safety valve will automatically open to ensure the safety of the battery.

  Sometimes, although the battery itself has safety control measures, the control fails due to some reasons. If there is no safety valve or gas can not be released through the safety valve, the internal pressure of the battery will rise sharply and cause explosion.

  Generally, the total energy stored by lithium-ion batteries is inversely proportional to their safety. With the increase of battery capacity, the battery volume is also increasing, and its heat dissipation performance becomes worse, which will greatly increase the possibility of accidents. For lithium-ion batteries for mobile phones, the basic requirement is that the probability of safety accidents should be less than one in a million, which is also the minimum standard acceptable to the public. For large capacity lithium-ion batteries, especially for automobiles, it is particularly important to use forced cooling.


Read recommendations:

Rack-mounted energy storage battery GN-2560

Is the voltage of lithium battery packs the same?

High-efficiency solar cell growth soars; conversion technology is key

803040 battery manufacture

802540 lipo battery

Last article:Main advantages of lithium battery

Next article:Lithium battery structure

Popular recommendation

360° FACTORY VR TOUR
lithium ion battery 18650 priceWhatsapp
lithium ion battery 18650 price

lithium ion battery 18650 priceTel
+86 19925278095

lithium ion battery 18650 priceEmail
admin@sino-techgroup.com

TOP