button battery cr1620

CR1620 Button Cell Battery Overview

CR1620 is a common button cell battery (Button Cell Battery) that is widely used in various small electronic devices due to its compact size and stable performance. This battery is particularly suitable for small devices that require a long-term stable power supply.
Main Features

Size and Specifications:
Diameter: 16 mm
Thickness: 2 mm
Hence the name "1620", where "16" represents the diameter and "20" represents the thickness (in millimeters).

Chemical Composition:
CR1620 belongs to the lithium manganese dioxide (Li-MnO₂) battery, which means that it uses lithium as the negative electrode material and manganese dioxide as the positive electrode material. This combination provides high energy density, long shelf life, and stable discharge characteristics.

Nominal Voltage:
The nominal voltage is 3 volts (V), which makes them ideal for small devices that require higher voltage.

Capacity:
The capacity is usually between 50mAh and 85mAh, depending on the manufacturer. This is enough for most low-power applications.

Self-discharge rate:
Low self-discharge rate means that most of the power can be retained even if not used for a long time. High-quality CR1620 batteries can retain most of their initial capacity after being stored for several years.

Operating temperature range:
The general operating temperature range is -20°C to 60°C, and some models may support a wider temperature range.

Safety:
Built-in multiple protection mechanisms such as overcharge protection, over-discharge protection, short-circuit protection, etc. ensure safety in use. However, for children, these small and round batteries are easy to swallow and pose serious health risks, so they must be properly stored and away from children.

Environmental friendliness:
Modern CR1620 batteries do not contain mercury and other harmful substances, making them more environmentally friendly. Used batteries should be properly disposed of in accordance with local regulations to reduce environmental pollution.

Application areas

Watches: Due to their small size, light weight and stable power supply, CR1620 batteries are often used in timers such as quartz watches.
Medical equipment: Portable medical instruments such as blood glucose meters and pulse oximeters require reliable power support.
Remote controls: including remote control devices for TVs, sound systems, and other household appliances, especially in applications that do not require particularly high current.
Toys and game equipment: especially those that require lightweight and miniaturized design.
Calculators: Small computing tools such as handheld calculators usually use CR1620 batteries as power sources.
Car keys: Modern car keys usually have built-in CR1620 batteries for power supply.
Wireless headphones: Some small wireless headphones may also use CR1620 batteries as power sources.
Smart tags and sensors: such as RFID tags, temperature sensors, etc., these devices usually require long-term stable power support.

Usage suggestions

Choose a reliable brand: Try to choose batteries from well-known brands when purchasing to ensure performance and safety.
Follow the correct replacement method: Replace the battery correctly according to the instructions in the device manual to avoid damaging the device or causing a short circuit.
Pay attention to the storage environment: It should be stored in a dry and cool place, avoiding high temperature and high humidity environments to avoid affecting battery performance.
Check the battery status regularly: Even if the device is not used frequently, the battery power should be checked regularly and replaced as needed to prevent leakage from damaging the device.
Dispose of used batteries properly: Dispose of used batteries properly in accordance with local regulations to avoid environmental pollution.

Alternative options

If you need a battery with different specifications or characteristics, here are some common alternatives to consider:

Other types of button batteries: such as CR2032 (slightly thicker, with higher capacity), CR1220 (smaller, suitable for more compact designs), etc., depending on your application needs.
Rechargeable button batteries: Although less common than disposable lithium batteries, such products do exist on the market, such as ML series or LIR series, which provide the advantages of reusability, but may differ in capacity and discharge characteristics.

Considerations

Match device needs: Make sure the selected battery is fully compatible with the device, especially in terms of voltage and physical size.
Risk of mixing: Do not mix old and new batteries or different types (such as CR1620 and CR2032) to avoid device damage or safety hazards.
Protection measures: Many devices have built-in protection circuits to prevent overcharging, over-discharging, and short circuits. It is important to ensure that these protection mechanisms are working properly.

Summary

CR1620 button batteries are an ideal choice for many devices that require stable DC power because of the stable voltage they provide and their compact size. Understanding their characteristics and how to use and maintain them properly can help you better manage and extend the life of these devices. If you have questions or need further help, consult a professional or refer to the user manual of the relevant product.
Further resources

If you need more information about CR1620 button batteries, you can directly visit the official website of the relevant manufacturer or contact your local authorized dealer. In addition, many online forums and technical support platforms are also good places to get the latest information and exchange experiences.
These websites provide a wealth of resources and support to help you better understand and use CR1620 button batteries.
Actual case analysis

Suppose you are developing a new smart bracelet that requires a lightweight battery solution that can provide sufficient battery life. Considering the space constraints and aesthetics of the device, you choose CR1620 button batteries as the power source. To ensure optimal performance, you can take the following steps:
Choose the right battery supplier

Evaluate products from multiple suppliers: Compare the technical parameters of CR1620 button batteries provided by different suppliers, such as capacity, cycle life, safety certification, etc.
Get samples for testing: Request samples from potential suppliers and conduct comprehensive testing in a laboratory environment to determine the best battery for your product.

Design optimization

Ensure good circuit design: Considering the energy output characteristics of CR1620 button batteries, the circuit should be optimized in product design to reduce unnecessary energy consumption.
Integrate protection measures: Ensure that there are appropriate protection measures at the battery installation location to prevent problems such as accidental short circuits or poor contact.

With the above methods, you can more accurately select and integrate CR1620 button batteries, thereby improving the overall performance and user experience of your product. I hope the above information can help you better understand and solve problems related to CR1620 button batteries.
Conclusion

Choosing a suitable CR1620 button battery can not only improve the performance of your product, but also ensure the safety and satisfaction of your users. I hope the above information can provide you with valuable reference and help you make a wise choice. If you have any further questions or need specific advice, please feel free to consult a professional or contact the relevant manufacturer.
Additional Notes

For the specific application scenarios of CR1620 button batteries, here is some additional information:

Emergency lighting equipment: such as small flashlights, LED light strings, etc., especially when there are strict requirements on volume and weight.
Smart home devices: such as smart door locks, sensor nodes, etc., these devices usually require long-term stable power support.
Educational toys: such as children's learning machines, electronic puzzles, etc., these devices usually have low power consumption and are suitable for CR1620 button batteries.

Maintenance Tips

In order to extend the service life of CR1620 button batteries, in addition to the above-mentioned usage suggestions, you can also take the following maintenance tips:

Avoid extreme temperatures: Try to avoid using or storing batteries at too high or too low temperatures. The ideal operating temperature range is usually 20°C to 25°C (68°F to 77°F).
Replace batteries in time: When the performance of the device begins to deteriorate, the battery should be replaced in time to prevent device failure due to insufficient voltage.
Separate old and new batteries: If you use multiple batteries at the same time, make sure all batteries are new or in similar condition to avoid performance problems caused by mixing old and new batteries.

Through proper use and maintenance, you can significantly extend the life of CR1620 button batteries and ensure that they are always in optimal working condition.

Policy and market trends

As the global focus on sustainable energy continues to increase, more and more countries and regions have introduced policies to encourage the use of environmentally friendly batteries and recycling programs. For example:

Battery recycling programs: Many regions have dedicated battery recycling points to encourage the public to return used batteries to designated locations for environmentally friendly disposal.
Environmental regulations: Some countries have strict regulations prohibiting the sale of batteries containing mercury or other hazardous substances, pushing the market towards a more environmentally friendly direction.

Understanding the relevant policies in your region can help you better plan your investment and maximize economic benefits. In addition, with the advancement of technology, the cost of CR1620 button batteries is gradually decreasing, and the performance is constantly improving, making this type of battery more affordable and acceptable.
Technological progress and future prospects

With the continuous advancement of technology, CR1620 button batteries are becoming more and more efficient and environmentally friendly. For example:

New materials: Researchers are exploring the use of new materials to increase the energy density and safety of batteries while reducing costs.
Microelectronics integration: Future batteries may be more closely integrated with microelectronics technology to achieve smarter energy management functions.
Renewable energy integration: In some specific application scenarios, CR1620 batteries may be combined with renewable energy devices such as small solar panels to form a more independent and sustainable power solution.

Read recommendations:

Lithium Battery LQ-1210

What is the cycle life of lithium iron phosphate batteries?button cell battery cr1620

lithium 3400mah 3.7v 18650 battery.Lithium titanate battery

801738 battery wholesaler

1800mah 18650 battery