18650 rechargeable battery lithium 3.7v 3500mah
CH
About Us
Company Profile Development History Sales Network Partner Social Responsibility
Products
Rechargeable Battery Battery Packs Energy Storage Battery Primary Battery Handicraft Article
Subsidiary Company
SINO TECHNOLOGY SUNBEAM GREEN POWER DATAPOWER SEONG-HEE STD
Honor
Qualification Certificate Patent Certificate Honor Certificate
R&D
R&D Center Test Center
News
Company News Industry News
Contact Us
18650 rechargeable battery lithium 3.7v 3500mah
18650 rechargeable battery lithium 3.7v 3500mah
Sino Technology Manufacturer Group co.,ltd Home  >  product  >  polymer lithium battery
polymer lithium battery

Primary battery

Rechargeable Battery

LR03 alkaline battery

Sino Technology Manufacturer Group co.,ltd
Sino Technology Manufacturer Group co.,ltd

3.7v 18650 lithium battery
3.7v 18650 lithium battery
3.7v 18650 lithium battery
3.7v 18650 lithium battery
3.7v 18650 lithium battery
3.7v 18650 lithium battery
>
<
3.7v 18650 lithium battery

3.7v 18650 lithium battery

Model: 18650

Capacity: 3000mAh

Standard voltage: 3.7V

Size: 18*65mm

Product origin: China

Storage time: 5 years


Application:

Ebike, scooters, solar panel, power storage, flashlight, power tools, medical equipment, motorcycle, digital products etc.


Product description

Related Products

  18650 lithium-ion battery pack production process

  (1) Baking

  Bake for 12 hours under the condition of constant temperature and vacuum degree of -0.09MPa. The main purpose is to dry the moisture of the battery cell.

  (2) Injection

  Inject the battery cell after vacuum baking into the electrolyte solution in the glove box filled with Ar gas. The amount of liquid injection is different according to the design of the lithium-ion battery pack. Use this to judge whether the injection volume is appropriate or not.

  (3) Welding tabs Weld the positive tab (aluminum strip) and the negative tab (nickel strip) to the scraper positions of the positive and negative tabs with an ultrasonic welding machine. Pay attention to prevent welding deviation, welding dislocation, and false welding.

  (4) Bottom welding. First put the insulating gasket into the steel shell, then put the wound battery core into the steel shell, and weld the negative tab to the bottom of the steel shell with a spot welder. Check the outer surface of the bottom of the steel shell, pick out yellow spots, black spots, defects, fires and other poor appearances, and try to pull the tabs, pick out 18650 lithium-ion battery packs that are not firmly spot welded, such as fires, weak welding, and desoldering.

  (5) sealing

  First spot weld the steel shell and cap of the 18650 lithium-ion battery pack with a spot welder, and then continue laser welding with a laser welder. Laser welding should ensure accurate positioning, and the welded parts are clean. It is strictly forbidden to cause deformation or damage to the battery. Check after welding, and repair welding for defective batteries such as welding holes and explosions.

  (6) Winding

  Put the ion-exchange membrane on the winding needle evenly, and the front end protrudes 2-5mm from the winding needle. There should be no wrinkles at the four corners of the pole piece. If the adhesive tape is misaligned left and right, the adhesive tape does not cover the solder joints and other defects, the positive electrode material must hug the negative electrode material, the electrode sheet cannot be rolled, and the front end of the electrode sheet must be inserted to the top.

  18650 lithium-ion battery assembly method

  1. The 18650 lithium-ion battery packs are neatly arranged, which is convenient for maintenance in the future. It is best to use a standard 18650 battery card tray;

  2. The welding is good. The most common welding method on the market is spot welding with a nickel welding machine. An electric soldering iron can also be used, and the solder joints are in good contact;

  3. After welding, the lines of each battery group must be clear;

  4. Do a good job of waterproofing and insulation. It is best to cut a piece of highland barley paper or use asbestos material;

  5. The most important point is that the internal resistance of the battery before welding, and the current voltage error should not exceed 0.05V! If conditions permit, a special protection board for 18650 lithium-ion battery pack must be added to prevent overcharging and over-discharging;

  6. After welding, measure whether the voltage of each circuit is good;

  7. After the newly assembled lithium-ion battery pack has been used for a period of time, it is necessary to check the voltage of the battery in groups.

3000mah_02.jpg

3000mah_03.jpg

3000mah_04.jpg

3000mah_05.jpg

3000mah_06.jpg

3000mah_07.jpg

3000mah_08.jpg

3000mah_09.jpg

3000mah_10.jpg

3000mah_11.jpg

3000mah_12.jpg



18650 lithium battery 3000mah 18650 lithium battery 3000mah

18650 lithium battery 3000mah

SUNBEAM

703048 lipo battery 703048 lipo battery

703048 lipo battery

SUNBEAM

18650 battery 3.7v 1800mah 18650 battery 3.7v 1800mah

18650 battery 3.7v 1800mah

SUNBEAM

6F22 battery 6F22 battery

6F22 battery

SUNBEAM

CR2430 battery CR2430 battery

CR2430 battery

GREEN POWER

CR2032 battery CR2032 battery

CR2032 battery

SUNBEAM

r03 battery r03 battery

r03 battery

SINO TECHNOLOGY

402030 polymer battery 402030 polymer battery

402030 polymer battery

GREEN POWER

18650 2000mah battery 18650 2000mah battery

18650 2000mah battery

GREEN POWER

button cell battery cr2025 button cell battery cr2025

button cell battery cr2025

SUNBEAM

Nickel Metal Hydride No. 5 battery Nickel Metal Hydride No. 5 battery

Nickel Metal Hydride No. 5 battery

GREEN POWER

18650 lithium rechargeable battery 18650 lithium rechargeable battery

18650 lithium rechargeable battery

GREEN POWER
Back to Previous Category Access to Factory
360° FACTORY VR TOUR
lithium ion battery 18650 priceWhatsapp
lithium ion battery 18650 price

lithium ion battery 18650 priceTel
+86 19925278095

lithium ion battery 18650 priceEmail
admin@sino-techgroup.com

TOP