AAA Ni-MH batteries

　　Overview of AAA Ni-MH batteries, what are the maintenance precautions?

　　AAA Ni-MH batteries are used in a wide range of applications. Its function is to store limited electrical energy and use it in the right place. You need to pay attention to adding water, charging, maintenance, and cleaning, so as to extend its life and continue to use it. Let me introduce it to you.

　　1. Overview of AAA Ni-MH batteries

　　1. AAA Ni-MH batteries are used as DC power sources for forklifts, tractors, trucks, underground mining locomotives and other equipment. They are widely used in airports, stations, ports, vegetable and fruit markets, industrial and mining enterprise warehouses and other places.

　　2. AAA Ni-MH batteries refer to special batteries for forklifts that use batteries to perform operations. This is the battery inside the battery of an electric forklift. The battery is a type of battery. Its function is to store limited electrical energy and use it in a suitable place.

　　3. Its working principle is to convert chemical energy into electrical energy. Note: it is best not to place the battery horizontally! Because the inside of the battery is generally 22 to 28% dilute sulfuric acid.

　　4. When the battery is being placed, the electrolyte can flood the plates and there is still a little space left. If the battery is placed horizontally, part of the electrode plates will be exposed to the air, which is very detrimental to the battery plates, and general battery observation There is an exhaust port on the top of the hole or battery that is connected to the outside world, so the electrolyte can easily flow out when the battery is placed horizontally.

　　2. Forklift battery maintenance matters

　　1. Add water: Add distilled water according to the specified liquid level. Do not add too much distilled water to extend the interval between adding water. Adding too much water will cause the electrolyte to overflow and cause leakage.

　　2. Charging: During the charging process, the battery will produce gas. The charging place should be well ventilated and there should be no open flames around. At the same time, the oxygen and acidic gas generated during the charging process will have an impact on the surrounding area. Unplugging the charging plug during charging will cause arcing. Turn off the charger before unplugging the plug. After charging, a lot of hydrogen gas will remain around the battery. No open flame is allowed. The cover on the battery should be opened for charging.

　　3. Maintenance of terminal posts, wires, and covers must be carried out by professional technicians designated by the manufacturer.

　　4. Cleaning: If it is not too dirty, you can wipe it clean with a damp cloth. If it is very dirty, remove the battery from the car, wash it with water and let it dry naturally.

　　5. Storage location: Do not short-circuit the battery; a short-circuit caused by rain may cause fire and may produce a small amount of hydrogen, so the battery must be stored in a ventilated and cool place.

　　6. Used batteries: Used batteries still contain electrical energy and should be stored according to the battery storage method used.

Read recommendations:

No.2 card-mounted carbon battery R14

48V lithium ion battery protection board

12V23A battery.Usage of lithium silicate batteries

solar energy storage battery pack Processing

18650 battery pack manufacturer