rechargeable battery 18650 3.7v

　　What are the maintenance methods and precautions for rechargeable battery 18650 3.7v?

　　Forklift battery maintenance method is to pay attention to cleaning the battery regularly. When transporting, disassembling or installing the battery, the forklift battery should pay attention to anti-vibration and keep the vent hole of the filling port unobstructed. Next, I will introduce to you how to maintain the forklift battery. What are the precautions?

　　1. Forklift battery maintenance methods

　　1. Cleaning. If dust accumulates on the surface of the battery, the dust will absorb water and cause leakage between the electrodes. When checking the electrolyte level, clean the battery surface regularly with a damp cloth and blow it dry. It should be noted that you do not need to wipe the battery with a dry cloth, dust it off or cover the battery with vinyl film. This will generate static electricity and cause the battery to explode. Do not put your fingers or fingers into the battery connecting plug, and do not touch the battery connecting electrodes, otherwise static electricity and short circuit will occur. Batteries should be cleaned before charging.

　　2. When transporting, disassembling or installing the forklift battery, attention should be paid to anti-vibration, and the forklift battery should be reliably fastened on the vehicle.

　　3. The starting time of the starter should not exceed 5 seconds each time, and the time interval between two uses should not be shorter than 15 seconds. If the starter fails for three consecutive times, a forklift maintenance technician should be found to find out the reason.

　　4. When filling the battery with electrolyte, it should be kept clean and dust should be prevented from entering the inside of the battery. Dust and other unclean substances on the surface of the forklift battery should be wiped off regularly to keep the vent of the filling port open.

　　5. Replenishing distilled water. The daily work is to add distilled water to the specified water level. In the long run, recommended distilled water should be used. Do not mix tap water, it will shorten the service life because it contains many impurities such as chlorine, iron, etc.

　　2. Forklift battery precautions

　　1. The battery should be kept clean and dry to avoid leakage current.

　　2. If there is liquid in the battery box, it must be sucked out immediately with a straw.

　　3. If the internal and external paint of the battery is found to be damaged, it should be repaired immediately to protect the insulation of the outer box from corrosion.

　　4. If it is found that the battery unit needs to be replaced, it should be done by professionals.

　　5. The battery should be stored in a dry, frost-free place.

　　6. Compensate charging once a month. The charging voltage is an average of 2.23 volts per battery unit. Please note that storage for too long will affect the overall life of the battery.

Read recommendations:

LR20

New zinc silver battery.18650 battery lithium ion 2200mah

Preparation and requirements of Lithium carbonate battery raw materials.18650 battery 3.7v 2200mah

1.2V Ni-MH Battery

18650 3500mah battery