18650 rechargeable battery lithium 3.7v 3500mah
CH
About Us
Company Profile Development History Sales Network Partner Social Responsibility
Products
Rechargeable Battery Battery Packs Energy Storage Battery Primary Battery Handicraft Article
Subsidiary Company
SINO TECHNOLOGY SUNBEAM GREEN POWER DATAPOWER SEONG-HEE STD
Honor
Qualification Certificate Patent Certificate Honor Certificate
R&D
R&D Center Test Center
News
Company News Industry News
Contact Us
18650 rechargeable battery lithium 3.7v 3500mah
18650 rechargeable battery lithium 3.7v 3500mah

Other information

Home  >  Other information

18650 li-ion battery

release time:2024-03-14 Hits:     Popular:AG11 battery

  How to repair the 18650 li-ion battery protection board?

  1. No voltage or abnormal voltage

  If there is no voltage or abnormal voltage, we should adjust the multimeter to DC 20 volts, then use the red meter pen to touch the positive electrode of the 18650 li-ion battery cell, and the black meter pen to touch the negative electrode of the battery cell. If the multimeter shows no voltage or the voltage is very low , it proves that the battery core is damaged.

  2. No overcurrent protection

  If there is no over-current protection, etc., first check whether the circuit of the over-current detection pin is defective. If so, replace the protection IC.

  3. No resistance or excessive resistance

  You need to find the cause from the identification circuit of the resistor pad, check whether the identification resistor is desoldered, whether the wrong resistor is pasted, whether there is a short circuit or open circuit, etc.

  4. There is no internal resistance or the internal resistance is too large

  1. If there is no internal resistance, you need to check whether the pins of the mos tube are damaged. If so, just replace the mos tube.

  2. If the internal resistance is too large, use a probe to contact the electric fish 18650 li-ion battery protection board to detect whether there is poor contact or excessive oxidation. You also need to check whether there are too many nickel flakes on the battery core. If there are too many nickel flakes on the battery core, it will also cause excessive internal resistance.


Read recommendations:

102540 1100mAh 3.7V

How to understand the drawbacks of materials used in the production of lithium iron phosphate batter

Scope of Application of Low temperature Lithium Batteries

Ni-MH batteries maker

18650 lithium battery cells

Last article:18650 lithium 3.7 battery

Next article:18650 li ion rechargeable battery

Popular recommendation

360° FACTORY VR TOUR
lithium ion battery 18650 priceWhatsapp
lithium ion battery 18650 price

lithium ion battery 18650 priceTel
+86 19925278095

lithium ion battery 18650 priceEmail
admin@sino-techgroup.com

TOP