602030 lipo battery

　　Frequently Asked Questions about 602030 lipo battery

　　Transportation, storage, battery charging and maintenance:

　　1. The battery is heavy and the casing is brittle, so the working voltage should be placed in the correct position. There are no side kicks, no rolling or throwing, and no need to withstand the force of the terminal blocks.

　　2. Batteries must be stored or installed in dry and naturally ventilated areas to prevent exposure to sunlight, and must be eliminated from plains and areas prone to fires.

　　3. Batteries should be charged before storage and discharge. The battery should be stored in a natural environment at 030 degrees Celsius, and the storage bottle should be filled every two months.

　　Perform a routine battery inspection every month to check for the following items:

　　(1) The battery casing and top cover must be kept clean, and the battery locking bolts and exit holes must be kept smooth.

　　(2) Electrical cylinder shell and polar cylinder shell.

　　(3) The battery case cover is not deformed, there is no leakage nearby, or there is no leakage or acid in the pole or valve.

　　(4) Whether the circuit is tight.

　　(5) Working voltage, battery pack current, total working voltage of single-bottle float and load current.

　　Frequently asked questions about 602030 lipo battery:

　　1. Overcharge and discharge: Since the equipment used by the customer does not have bottom voltage protection, ensure that the rechargeable battery is not charged below 10v;

　　2. Battery charging error: The appropriate ones are positive (bright red) level (bright red); negative (gray black) level (gray black) rechargeable battery negative level (gray black). If the battery is charged incorrectly, the working voltage will be lower , and prevent everything;

　　3. Short-circuit failure of the rechargeable battery: A short-circuit failure of the rechargeable battery will cause the rechargeable battery to burn out or even cause damage;

　　4. The rechargeable battery has no working voltage: the rechargeable battery has been damaged and disabled;

　　Rechargeable battery bulge: short-circuit failure of the inner pole piece will cause immediate damage and stop use;

　　6. Liquid spillage: The liquid should be cleaned to prevent corrosion of other metal materials. A small amount of spillage will not damage the application;

　　7. Cracking during transportation: If the product is cracked during transportation, use should be stopped immediately.

Read recommendations:

601848 500mAh 3.7V

li ion 18650 battery pack.Talk about the effect of gelling agent content on the discharge performanc

Separation capacity of lithium batteries.CR2032 button cell battery

energy storage battery guangdong direct sales

3.7 volt 18650 lithium battery