CR1225 battery

　　Detailed explanation of new resettable circuit protection methods for CR1225 battery

　　The rapid growth of the high-rate discharge lithium-ion battery application market has created a need for cost-effective circuit protection devices that can provide a holding current of 30A+ under 30V DC voltage. To meet this need, a hybrid device has been developed that connects a bimetallic protector and a PPTC (Polymer Positive Temperature Coefficient) device in parallel.

　　Detailed explanation of new resettable circuit protection methods for CR1225 battery

　　New MHP devices

　　The rapid growth of the high-rate discharge lithium-ion battery application market has created a need for cost-effective circuit protection devices that can provide a holding current of 30A+ under 30V DC voltage. To meet this need, a hybrid device has been developed that connects a bimetallic protector and a PPTC (Polymer Positive Temperature Coefficient) device in parallel. The resulting MHP (MetalHybridPPTC, Metal Hybrid PPTC) device provides a resettable overcurrent protection function while also utilizing the low impedance characteristics of the PPTC device to prevent bimetallic protectors from arcing at higher currents.

　　application

　　MHP circuit protection devices provide battery pack designers and manufacturers with a way to optimize space, reduce cost and enhance safety, and the device technology can be configured for a variety of different applications. Devices with higher voltages and holding currents are now under development, and future design considerations include lithium-ion battery packs for cordless power tools, e-bikes, e-motorcycles, light electric vehicles (LEVs), and backup power applications. battery protection in , as well as non-battery applications such as motor protection.

　　design concept

　　Test data shows how a typical bimetallic protector and polymer PTC integrated together, such as the PolySwitchRXEF050 device, can provide similar latching benefits to a combination of ceramic PTC and bimetallic protectors while providing additional dissipation at higher currents. arc function.

　　Due to the low contact resistance of the bimetallic contacts, current flows through the bimetallic contacts under normal operation. When an abnormal event occurs, such as a locked rotor in a power tool, a higher current is generated in the circuit, causing the bimetallic contacts to open and their contact resistance to increase. At this point, the current is shunted to the lower impedance PPTC device, which also heats the bimetal, causing it to open and remain in a locked state, thus helping to prevent arcing between the contacts. Please refer to Figure 2.

　　Smaller contact area and lower impedance

　　In order to reduce device size, MHP devices use a design called "Double-Make" or "Double-Break" as a contact method. This technology offers several advantages over typical bimetallic protectors: the device has very low impedance because the current flow path is very short; heat is generated only at the contact point, and thermal control can be used to achieve precise Thermal activation; it facilitates the use of small protective devices.

Read recommendations:

Lithium-ion battery GN500

Analysis of the Causes of Lithium Battery Explosion.18650 lithium rechargeable battery

The principle of ternary polymer lithium-ion batteries

NiMH No.13 batteries direct sales

AAA NiMH batteries