18650 rechargeable battery lithium 3.7v 3500mah
CH
About Us
Company Profile Development History Sales Network Partner Social Responsibility
Products
Rechargeable Battery Battery Packs Energy Storage Battery Primary Battery Handicraft Article
Subsidiary Company
SINO TECHNOLOGY SUNBEAM GREEN POWER DATAPOWER SEONG-HEE STD
Honor
Qualification Certificate Patent Certificate Honor Certificate
R&D
R&D Center Test Center
News
Company News Industry News
Contact Us
18650 rechargeable battery lithium 3.7v 3500mah
18650 rechargeable battery lithium 3.7v 3500mah

Other information

Home  >  Other information

How to set the ratio of positive and negative electrodes for lithium batteries?AG10 battery

release time:2023-08-24 Hits:     Popular:AG11 battery

  

  The so-called ratio of positive and negative electrodes in lithium batteries, to put it bluntly, means how much excess is needed for the negative electrode to be suitable; Excessive consumption can cause waste of the negative electrode, but it can improve the capacity of the positive electrode (i.e. high capacity); If there is too much or less, there is a risk of lithium precipitation, which makes it difficult to fully utilize the positive electrode capacity (i.e. low capacity).

  CB value: also abbreviated as Ce11Balance in English.

  The calculation method is as follows: CB=negative electrode capacity per unit area/positive electrode capacity per unit area. Under normal circumstances, the CB value is determined by the following conditions:

  1. The first efficiency of active materials;

  2. Coating accuracy;

  3. The decay rate of the positive and negative pole cycle (requires some experience).

  If the coating accuracy can reach 100% and the first efficiency of the positive electrode is greater than the first efficiency of the negative electrode, then the CB value can theoretically approach 1. However, considering that the attenuation of the negative electrode is generally greater than that of the positive electrode, it is still necessary to increase the CB value.

  Positive electrode material: Taking lithium borate as an example, the designed capacity is 140mAh/g (the initial efficiency of lithium borate is generally 95%); Negative electrode material: artificial graphite, designed with a capacity of 340mAh/g (the first efficiency of artificial graphite is generally 90%); Coating accuracy: Assuming a coating accuracy deviation of 2.5%;


Read recommendations:

801738 450MAH 3.7V

Causes of explosion of lithium battery

LR41 battery.What are the characteristics of the 18650 lithium battery pack

522749 polymer battery

AG5 battery

Last article:Application of UPS in Uninterruptible Power Supply.18650 rechargeable battery lithium 3.7v 3500mah

Next article:Will Cold Weather Reduce the Performance of Lithium Batteries.6LR61 alkaline battery

Popular recommendation

360° FACTORY VR TOUR
lithium ion battery 18650 priceWhatsapp
lithium ion battery 18650 price

lithium ion battery 18650 priceTel
+86 19925278095

lithium ion battery 18650 priceEmail
admin@sino-techgroup.com

TOP