Nickel Hydride Batteries

　　How to use Nickel Hydride Batteries correctly?

　　As we all know, most electric forklifts use batteries as the driving source. The battery is an energy conversion and storage device. It can convert electrical energy into chemical energy and store it when charging. It can convert chemical energy into electrical energy and transport it when discharging. Batteries have the advantages of low cost, high cost performance, large capacity, high power, and less pollution.

　　However, the battery is also a relatively fragile part of the electric forklift. Improper operation or lack of maintenance will shorten the life of the electric forklift, affect work efficiency, and in serious cases may lead to safety problems.

　　Regarding how to use electric forklift batteries correctly, forklift battery manufacturers have something to say.

　　The battery of an electric forklift produces hydrogen gas, which may cause a fire or even an explosion if ignored. Therefore, drivers should not smoke or use open flames near the battery.

　　When charging an electric forklift, be sure to do so in a ventilated place, not in a confined space or at an air outlet to avoid corrosion caused by acid mist.

　　The battery fluid of an electric forklift contains corrosive liquid that may burn the human body, so avoid contact with the skin, especially the eyes. The forklift battery manufacturer reminds that if an accident occurs, you should first rinse it with plenty of water, perform simple treatment and then go to the hospital in time.

　　The battery surface and connections of the electric forklift must be kept clean and free of dirt. If there is dirt, it should be dealt with in time to prevent safety problems.

　　When cleaning the battery, use a wet rag. Do not rinse directly with water or use a dry rag.

　　When inspecting and maintaining the battery, use rubber gloves to prevent accidental electric shock.

　　When charging the battery, make sure the electrolyte temperature is below 50 degrees, especially in hot and humid summers, to avoid damage caused by electrolyte overflow.

　　Moreover, forklift battery manufacturers remind you to be careful not to let the electrolyte level fall below the minimum line, otherwise the battery may be easily burned out.

　　The battery is an important part of the electric forklift, providing power for the operation of the entire electric forklift. If you want to extend the life of your electric forklift, you must pay attention to protecting the battery.

　　Drivers must abide by operating regulations and clean, charge, repair, and maintain batteries in accordance with regulations. They must not treat them carelessly. Forklift battery manufacturers believe that this is not only for the healthy operation of the battery, but also for the safe operation of the driver.

Read recommendations:

Coin Battery CR 2320

What are the misunderstandings about lithium battery discharge?402030 battery

Introduction to lithium iron phosphate battery.501825 battery

energy storage system lithium battery Vendor

18650 1800mah battery