R03 Carbon battery.Lithium-ion battery protection circuit

　　Lithium-ion battery protection circuit provided by electronic enthusiasts, lithium-ion battery protection circuit 1. Function of the protection circuit A. Overcharge protection In order to prevent the battery from overheating or exploding due to overcharging, when the battery voltage exceeds the specified maximum

　　Lithium-ion battery protection circuit 1. Function of the protection circuit A. Overcharge protection In order to prevent the battery from overheating or exploding due to overcharging, charging is stopped when the battery voltage exceeds the specified maximum voltage value. B. Over-discharge protection In order to prevent battery performance degradation due to over-discharge, discharge is stopped when the battery voltage is lower than the specified minimum voltage value. C. Overcurrent protection stops discharging when the current flowing through the battery becomes abnormal (several amps or higher) due to equipment failure. D. Short-circuit protection Due to internal short-circuit in the battery pack and other reasons, when a large current of tens of amps flows through the battery, it will quickly stop discharging.

　　2. Protection circuit module (taking a battery as an example) Related pictures of this topic are as follows: screen.width-333)this.width=screen.width-333"border=0>

　　3. Protection circuit module A and cobalt type for each cathode material. Related pictures on this topic are as follows: screen.width-333)this.width=screen.width-333"border=0>

　　3. Protection circuit module B and manganese type for each cathode material. Related pictures on this topic are as follows: screen.width-333)this.width=screen.width-333"border=0>

　　protecTIonCircuitryModuleForBatterypack(3)ElectricalBlockDiagram:pINDESCRIpTION:Related pictures of this topic are as follows: screen.width-333)this.width=screen.width-333"border=0>Related pictures of this topic are as follows: screen.width-333)this.width= screen.width-333"border=0>

Read recommendations:

Ni-MH AAA1000mAh 1.2V

Lithium ion battery separator structure.battery 18650 rechargeable

What is the difference between lithium battery protection board and BMS (battery management system)?

Ni-MH batteries Manufacturing

CR2025 battery