The difference between lithium battery and polymer lithium battery.connector for energy storage battery direct sales

　　Lithium battery is a secondary battery made of secondary lithium as a positive electrode material, which is made of polymer electrolyte. Lithium batteries have the advantages of large capacity, small volume, light weight, and low self -loading. They are widely used in electronic products such as mobile phones, laptops, and digital cameras. Compared with the traditional lead -acid battery, the polymer lithium battery has a larger power output, which can adjust the voltage within a large range. The polymer lithium battery can be charged for the mobile phone, or it can be charged with an electronic device in the mobile phone. You can use a car or battery on the train to charge it.

　　The polymer lithium battery is mainly used on the power supply of mobile phones or electronic devices, and it can be used as an energy storage device; lead -acid batteries are mainly used on the battery of the car. Polymer lithium (LIPO) battery is a lithium nickel cobalt manganese composite oxide (LIPO) lithium secondary energy power battery made of special additives. Its positive material is high -purity triple yuan (Lini1/2MN1/2CU2O); the negative electrode material is high -purity nickel nickel. The single capacity is about 20 mAh/g. The polymer septum can be used as a negative polarization fluid of the secondary energy power batteries; the traditional lead battery negative episodes are lead -tin alloy or lead silicon alloy, aluminum alloy, and their life span, high cost, large environmental pollution, and difficulty recycling. Meet the needs of the rapid development of new energy vehicles. The lipo battery can charging the mobile phone; the traditional lead battery needs to be charged external power supply to the environmentGreat pollution.

　　1. Light weight

　　Self -discharge low; no memory effect; long cycle life; charging can be fully charged without electricity. Lipo battery: The weight of the single body is less than 100g;

　　2. High security performance

　　Lithium batteries do not explode, which is the highest point of lithium battery safety performance. The polymer lithium battery is more resistant to high pressure than metal aluminum electrolytes. The polymer diaphragm is more elastic, which can better adapt to the contraction state of the diaphragm. [6] The titanium -titanium titanium negative material has high safety, and it will not hurt the materials inside the battery even if the explosion occurs;

　　3. Long cycle life

　　The cycle life of the polymer lithium battery is longer than that of lithium batteries. Under the same conditions, the number of cycles can reach more than 10,000 times. [1] Polymer lithium batteries do not contain toxic substances, such as sulfuric acid,; therefore, it is also better for environmental friendship. [2] It has unique chemical stability and has no corrosion of positive and negative electrode materials; when contacting positive electrodes, a high layer of insulation protection thin film is produced, which prevents short circuits between positive and negative electrodes. [3] Do not heat during charging or discharge; charging or discharge speed at low temperature; the charging speed is accelerated after the temperature rises. [4] The polymer battery can extend the charging time and use time by increasing the single capacity; compared with the lithium battery, it can be improved by extending the charging time and extending the use time; Cyclical life. [5] There are more cycles in the same environment, so you can get more electricity with less money.

Read recommendations:

Ni-MH AAA1000mAh 1.2V

Which cobaltate battery and polymer battery is better.3.2v 6000mah lifepo4 battery

Lithium phosphate iron and lithium battery principle.Column rechargeable battery

Nickel Hydride Batteries price

9V USB 1.5V 1000mWh