6LR61 battery

Teach you the basics of charging electric 6LR61 battery

Electric 6LR61 battery belong to a system that converts electrical energy into mechanical energy. When the power output is used up, it must be supplemented with current, otherwise the battery will be useless. Leaving it alone will also cause the active substances in the battery to fall off. The normal charging current should be in a certain proportion to the forklift battery. For example: 48V400AH, 0.14 times the capacity can meet the basic requirements. Exceeding this current value will cause overcharging, and the battery electrolyte will evaporate too quickly. Once a peculiar smell is generated, the forklift battery plate will fall off. Overcharging will cause the capacity to drop quickly. In order to avoid affecting the forklift battery, we must learn the correct charging method. We can do it like this: the current on the plate is evenly distributed, the resistance is small, and the loss of charging current can be reduced. The gassing of the battery is covered around the negative and positive electrodes, increasing the internal resistance of the battery, aggravating the ohmic polarization, and affecting the charging current efficiency. The thickness and porosity of the active material on the positive electrode of the battery. If the active material has a large porosity and the plate is thin, it is conducive to the diffusion of the electrolyte, and the polarization effect is reduced. Discharge depth.

The deeper the discharge depth, the positive active material Pbo: and the negative active material Pb are greatly reduced, and the substances that need to be converted through charging increase, that is, the products participating in the reaction during charging are also more, thereby improving the charging acceptance capacity. We do not recommend adjusting the charger to the maximum. Everyone knows that the principle of slow and steady flow is that rapid charging is very harmful to the electric forklift battery.

Read recommendations:

Home energy storage battery GN-BOX1

Working principle of electric humidifier

Standards for Lithium - Battery Manufacturing Process Flow

3.2v 25ah lifepo4 battery cell

AG3 battery