Advantages of Lithium Battery Wheel Dehumidifier.3.7V Lithium Polymer Battery

　　Low energy consumption

　　The main energy consumption of the runner Dehumidifier is regeneration energy consumption. The heat required for regeneration is mainly electric heating, steam heating, gas heating, industrial waste heat and other heating methods, which can be flexibly determined according to the specific conditions of users; For example, "Hangzhou Maxi Dehumidifier" uses a special structure to save energy and consumption by using the heat recovery flow system, which can save more than 30% compared with the conventional. For air conditioning systems that require dehumidification, a combination of rotary dehumidification and frozen dehumidification is used. Compared to using a simple refrigeration method for dehumidification, the former can save 20% to 50% of total power consumption compared to the latter; If the user has steam conditions, this method has a more significant energy-saving effect.

　　The air temperature, humidity or dew point temperature at the outlet of the dehumidification unit depends on the control of the temperature, humidity and regenerative energy of the inlet air; When the outlet humidity reaches the set value, the regeneration temperature needs to be reduced to save energy consumption; Similarly, the front and rear air conditioning boxes control the flow of ice water through temperature controllers to achieve energy-saving effects; The control mode of dehumidification unit usually adopts PLC and DDC for manual, automatic and remote control, which can be freely selected by customers. And configure the touch screen according to user needs to configure monitoring software, etc.

　　high efficiency

　　The runner of Dehumidifier adopts world-class runner products, with large dehumidification capacity and high efficiency; The specially designed sealing system ensures the overall dehumidification ability of the equipment; The runner can be cleaned with water to remove some dust, oil, etc; Its service life is over ten years. Carefully designed inner frame structure and high-pressure polyurethane foam double-layer insulation panel, with good insulation effect and anti cold bridge measures, can be freely combined with air conditioning boxes; Specially designed sealing structure and special maintenance door ensure low air leakage rate of the unit; High strength steel frame ensures no deformation of the unit under high positive and negative pressure operating conditions.

Read recommendations:

551235 180mAh 3.7V

Method of electric vehicle high Lithium battery charging.LR03 battery

The advantages of electric vehicle fuel cells

AA NiMH battery Manufacturing

18650 battery rechargeable