CR1225 battery

　　What are the misunderstandings about using CR1225 battery?

　　There are several common misunderstandings in the use of CR1225 battery, such as using the starter continuously in winter, or not treating corrosion on the surface of pole terminals. The cause of high temperature in CR1225 battery may be continuous large current discharge or The battery plates are aging. Here is a detailed introduction to "Misunderstandings of CR1225 battery and Causes of High Temperature".

　　1. Misunderstandings about CR1225 battery

　　1. When using the battery to start in winter, continuous use of the starter will cause the battery to be damaged due to excessive discharge.

　　2. If there is corrosion on the surface of the battery pole terminals, there is no need to deal with it, as long as it is not loose. Corrosion appears on the outside, and corrosion will also appear on the inner surface of the terminal, causing the resistance value to increase and affecting the normal charging and discharging of the battery. It must be dealt with in time.

　　3. When using maintenance-free batteries, simply think that maintenance-free means that no maintenance is required.

　　4. If the density of the electrolyte is not checked and adjusted, especially when winter comes, it will cause insufficient battery capacity and even cause the electrolyte to freeze.

　　5. When the liquid level is low, replenish the electrolyte or add pure water instead of the required distilled water. If electrolyte containing sulfuric acid is added, the concentration of the electrolyte inside the battery will increase, and phenomena such as boiling and acid mist may occur, seriously affecting the service life of the battery. Use drinking purified water instead of distilled water, as purified water contains various trace amounts of inorganic substances. , has a negative impact on the battery.

　　2. Causes of high temperature in CR1225 battery

　　1. The forklift battery continues to discharge with high current, causing the battery temperature to be high. Finally, shorten the high current discharge time during use and pay more attention to printing.

　　2. The aging of the ordinary battery plates causes the internal resistance of the ordinary battery to increase. The internal resistance generates a large amount of heat during use, resulting in high temperature of the battery. In this case, there are potential safety hazards, and the general power supply must be replaced in time.

Read recommendations:

Ni-MH AAA500mAh 1.2V

What is a ternary lithium battery?lifepo4 48v 100ah lithium ion battery

18650 lithium battery is the best companion for outdoor exploration

3.7 volt 18650 lithium battery

18650 battery 10000mah